=================Guopion&东风不破============
我是在打开时只出现启动图标,然后就消失没有反应,多次安装,安转到不同的盘符都不行,之后在网上搜索。看到了
我采用:启动Pro/ENGINEER Wildfire 4.0. 之前删除缓冲区。
打开C:\Documents and Settings\Administrator(或者你登陆计算机的名字)\Application Data\PTC\ProENGINEER\Wildfire\.wf, 删除 .wf 文件夹
============================================
Issue Desc:
When startup Wildfire 4.0, only the logo appear then disappear, Wildfire 4.0 cannot be launched.
Resolutions:
This issue happened when there are two different versions of Pro/ENGINEER installed on one machine and they are share the same cache.
To resolve this issue, there are two ways:
One way is to delete the cache before startup Pro/ENGINEER Wildfire 4.0.
>> Browse to C:\Documents and Settings\Administrator(or your login name)\Application Data\PTC\ProENGINEER\Wildfire\.wf, delete the .wf folder.
>> If you had set system environment PTC_WF_ROOT, please delete the folder under PTC_WF_ROOT.
hvM4LfwY t
The other way is to add system environment at Pro/ENGINEER Wildfire 4.0 startup command.
>> Open the Pro/ENGINEER startup file .psf (at <proe_loadpoint>\bin folder) with wordpad, add a line "ENV=PTC_WF_ROOT=D:\workspace\windchill\Forwf4", the value D:\workspace\windchill\Forwf4 is the path for writing cache. (Refer to bellowed picture)